(905) 775-5901Talk to an estimator
From Worn-Out Concrete to a Sleek, Durable Garage Floor
2024
650
Sq Ft
Concrete Coating
Garage Floor Coating

From Worn-Out Concrete to a Sleek, Durable Garage Floor

Epoxy Boss logo

Project Details

Gallery

Gallery

Flake coating over worn garage concrete installed by Epoxy Boss in Ontario
Flake coating over worn garage concrete, an Epoxy Boss project in Ontario
Flake coating over worn garage concrete by Epoxy Boss

Description

Problem & Solution: From Salt-Damaged Concrete to a Sleek, Slip-Resistant Garage

The Problem:

This 650 sqft three-car garage had seen years of wear and tear from daily vehicle use, salt damage, and moisture exposure. The concrete surface was cracked, stained, and showing clear signs of deterioration, with water pooling in certain areas, leaving permanent wet stains. Salt deposits had eaten away at the surface, making it rough and uneven, while the existing finish had no real protection against oil spills, tire marks, or the seasonal freeze-thaw cycle. The homeowner wanted a garage that wasn’t just functional, but one that looked sleek, stayed clean, and could stand up to the elements.

The Solution:

We tackled the damaged concrete head-on, starting with full mechanical grinding to remove salt-contaminated areas and existing surface imperfections. Next, we repaired all cracks with high-strength polyurea, preventing them from expanding and ensuring a solid foundation. To reinforce durability, we applied a polyurea/polyaspartic basecoat, providing moisture resistance and long-term adhesion. The full broadcast of Coyote Flakes gave the garage a seamless, high-end finish, while the polyaspartic topcoat, enhanced with aluminum oxide, added superior slip resistance—perfect for wet conditions and vehicle movement. The 3-inch vertical coating along the walls not only created a clean, polished look but also protected against grime buildup, water intrusion, and impact damage. Now, this garage is fully sealed, easy to clean, and built to handle anything—from heavy traffic to winter road salt, all while looking sharp and professional.

Task: Flake System Installation – Three-Car Garage Transformation

  • Surface Preparation – Grinding Away the Old
    • We mechanically ground the entire concrete surface, removing salt damage, stains, and imperfections, creating a clean and porous base for maximum adhesion.
  • Crack Repair – Strengthening the Foundation
    • Step 1: Opened up cracks using precision grinding to remove weak areas and prepare for filling.
    • Step 2: Injected high-strength polyurea crack filler, ensuring flexibility and long-term durability.
    • Step 3: Re-ground the surface to blend the repaired cracks seamlessly into the floor.
  • Basecoat Application – Locking in Strength
    • Applied a polyurea/polyaspartic basecoat, designed for maximum adhesion, impact resistance, and moisture protection.
  • Full Flake Broadcast – Bringing the Floor to Life
    • Coyote Flakes were broadcasted to full rejection, ensuring complete coverage, enhanced durability, and a seamless, high-end finish.
  • 3-Inch Vertical Coating – Extra Wall Protection
    • Extended the coating 3 inches up the garage walls, preventing dirt buildup, water intrusion, and impact damage while creating a sleek, polished edge.
  • Polyaspartic Topcoat – Sealing the Deal
    • Applied a clear, high-performance polyaspartic topcoat, infused with aluminum oxide for extra slip resistance and long-lasting durability.
  • The Final Reveal – A Garage That Stays Clean & Looks Sharp
    • In just a few days, this garage was completely transformed—stain-proof, crack-resistant, and ready for anything, from harsh winters to everyday vehicle use.

This three-car garage in Tiny, Ontario had been through some serious wear and tear. Cracks ran across the surface, making it look tired and uneven, while years of parked cars left ugly wet stains that just wouldn’t go away. Every time water hit the concrete, it soaked in, making the whole space feel old and abused. The homeowner wanted something better—a floor that looked sharp, stayed clean, and wouldn’t wear down from daily use.

“Alright, time to bring this garage back to life.”

We started by grinding the entire floor, getting rid of all those stains, weak spots, and cracks. But we didn’t stop there—we opened up every crack, filled them with industrial-grade polyurea, and then ground them smooth again to make sure the foundation was rock solid. Once the floor was prepped, we laid down a polyurea/polyaspartic basecoat, built to handle heavy vehicle traffic, resist stains, and last for years.

Then came the fun part—the full flake broadcast using Coyote Flakes, giving the garage a sleek, textured finish. To add extra protection, we coated 3 inches up the walls, preventing moisture buildup and keeping the edges looking crisp. Finally, we locked it all in with a polyaspartic topcoat, infused with aluminum oxide for extra slip resistance, making sure the floor stays safe and easy to clean, no matter what gets thrown at it.

“The final result? A garage that looks brand new and stays that way.”

No more stains, no more cracks, no more mess—just a smooth, durable, and high-performance garage floor that’s built to last. If your garage floor needs an upgrade, you know what to do—Epoxy Boss has got you covered.

Solution

Scope at a glance

  • Full mechanical grinding to remove salt-damaged surface
  • Crack repair with high-strength polyurea (open, fill, re-grind)
  • Polyurea/polyaspartic basecoat
  • Full broadcast of Coyote flakes
  • 3-inch vertical coating along the walls
  • Polyaspartic topcoat with aluminum oxide

Related Projects

Flake Garage Floor in King, Ontario
King Flake Garage Floor
~300
Sq Ft
Flakes System
King City
Garage Floor Coating
Flake Backyard Patio Coating in Vaughan, Ontario
Vaughan Flake Patio Coating
~400
Sq Ft
Flakes System
Vaughan
Patio
Flake Garage Floor in Innisfil, Ontario (2021)
Innisfil Flake Garage Floor 2021
~450
Sq Ft
Flakes System
Innisfil
Garage Floor Coating
Interior Epoxy Floor Coating in Guelph, Ontario
Guelph Interior Epoxy Floor
~200
Sq Ft
Metallic System
Basement & Indoor Spaces
Flake Entrance Landing and Steps in Barrie, Ontario
Barrie Flake Entrance & Steps
~100
Sq Ft
Flakes System
Barrie
Porch
Exterior Flake Entrance Coating in Halton Hills, Ontario
Halton Hills Exterior Flake Entrance
~150
Sq Ft
Flakes System
Halton Hills
Porch
Flake Garage Floor in Muskoka Lakes, Ontario
Muskoka Lakes Flake Garage Floor
~800
Sq Ft
Flakes System
Muskoka Lakes
Garage Floor Coating
Flake Floor Coating in Pickering, Ontario (2021)
Pickering Flake Floor Coating
~450
Sq Ft
Flakes System
Pickering
Garage Floor Coating
Flake Deck Coating in Tiny, Ontario
Tiny Flake Deck Coating
~300
Sq Ft
Flakes System
Tiny
Patio

Ready to Upgrade Your Floors?

Custom epoxy systems tailored for garages, basements, showrooms, patios, and industrial environments — combining industrial-grade durability with premium aesthetics.

How we work

Coated concrete floor by Epoxy Boss in Ontario
01

First Contact

Reach out by phone, email or our online form. We'll ask a few questions about your space, how it's used and the finish you have in mind, and review photos if you have them.
02

Quotation

Get a clear and accurate price using our online calculator for instant estimates, or connect with us directly for a detailed quote. For more complex projects, we can schedule an on-site visit to finalize all details.
03

Decision making

We help you choose the right system, finish, and colours based on your goals. From flake to solid or metallic systems, you will have full clarity and confidence in your selection.
04

Scheduling + 50% Deposit

Once everything is confirmed, we lock in your project date. A 50% deposit secures your spot, allowing us to allocate materials and crew accordingly.
05

Day of the project

Our team completes full surface preparation including grinding and crack repair, followed by precise application of your selected multi-layered system based on manufacturer specifications.
06

Project Review

We walk through the finished space with you to ensure satisfaction. After approval, the remaining 50% balance is collected and the project is officially completed.