This 1,000+ sqft space had a flooring issue that couldn’t be ignored. The entire surface was covered in old, stubborn glue residue from a previous flooring application, making it impossible to apply any new coating without serious prep work. The floor wasn’t just messy—it was uneven, damaged, and unfit for heavy traffic.
Beyond that, the client had concerns about the edges where the floor met the walls. Without proper protection, those areas would become traps for dirt, moisture, and damage over time. They needed a solution that was tough, seamless, and easy to maintain, ensuring the entire space stayed in top condition for years to come.
We didn’t just offer a quick fix—we provided the best long-term solution tailored to the client's needs. Instead of just grinding the floor and applying a standard coating, we recommended a flake system with an 8-inch vertical cove base for several critical reasons.
A flake system was the perfect choice for this space because it offers superior durability, slip resistance, and an aesthetically pleasing finish. Unlike traditional epoxy coatings, the full flake broadcast would provide extra texture and strength, ensuring the floor could handle heavy traffic, spills, and everyday wear without losing its appeal.
For the glue removal, skipping this step would have led to poor adhesion, peeling, and premature failure of any new coating. By thoroughly grinding and removing the residue, we ensured the new polyurea/polyaspartic basecoat could properly bond to the surface, eliminating weak spots that could cause future issues.
The 8-inch vertical cove base was a must-have for this space. Without it, the edges of the floor would have remained a weak point, prone to moisture damage and buildup of grime. By seamlessly integrating the floor into the walls, we eliminated hard-to-clean corners, making maintenance effortless while also reinforcing the structure.
In the end, this wasn’t just about making the floor look good—it was about ensuring longevity, safety, and practicality. The client now has a seamless, ultra-durable floor that’s easy to maintain, built for heavy use, and guaranteed to last.
So we roll up to this 1,000+ sqft spot, and man… it was a mess. Old tile bonding glue residue was everywhere, holding on for dear life like it was never planning to leave. This wasn’t just a quick sweep-and-coat job—this floor needed serious work before we could even think about making it look good. And to top it off, the client wanted the edges sealed up too—no grime-collecting corners, no weak spots. Challenge accepted.
“First things first—had to break up with that glue.”
This wasn’t the kinda glue that just peels off when you give it a dirty look. Nope, we had to bring in the big guns—industrial grinders. The team went to work, grinding down every last bit of that sticky nightmare until we had a smooth, prepped surface. No shortcuts. If we didn’t get this part right, the new coating wouldn’t stick, and in a few months, it’d be peeling up like bad sunburn. Not on our watch.
“Once we had a clean slate, it was go-time.”
Next step? A rock-solid polyurea/polyaspartic basecoat—basically, the backbone of the whole operation. This stuff bonds like crazy to the concrete, setting the stage for a super durable finish. Once that was locked in, it was time for the fun part…
“Time to flake it till we make it.”
And when I say flake, I mean full broadcast, wall-to-wall, no patchy spots. We rained down those vinyl flakes like confetti at a championship game, making sure the floor wasn’t just tough—it had texture, grip, and that high-end finish the client was looking for. But we weren’t done yet.
“You know how the worst part of any floor is the edges?”
That’s why we didn’t stop at just the floor. We brought the coating 8 inches up the walls, creating a seamless vertical cove base. No dirt traps, no moisture sneaking in—just one smooth, easy-to-clean surface. The kind of detail that makes a good floor a great one.
“Last step—locking it all in.”
With the flakes in place, we sealed it with a polyaspartic topcoat—this stuff is next-level. UV-resistant, chemical-proof, scratch-resistant… basically, if this floor was a superhero, this would be its indestructible shield.
“And just like that, another floor, another masterpiece.”
The once glue-ridden disaster was now a seamless, high-performance flake floor that could handle anything. No more weak spots, no more grime-catching edges—just a durable, stylish, low-maintenance floor built to last. The client was pumped, and honestly? So were we.
If your floor’s stuck in the past—literally—you know who to call.