From Concrete Chaos to Car Detailing Dream – The Epoxy Boss Transformation

Stayner, Ontario
2,150 sqft
2024
Location
Size
Year
Stayner, Ontario
Location
2,150 sqft
Size
2024
Year

Problem & Solution: From High-Maintenance Mess to High-Performance Perfection

The Problem:

This 2,150 sqft car detailing shop in Stayner, Ontario, was dealing with a serious flooring dilemma. With constant water runoff, chemical spills, and heavy rolling tool carts, the untreated concrete was a stain magnet, absorbing oil and moisture like a sponge. The shop needed a durable, easy-to-clean, and professional-looking floor that wouldn’t degrade under the daily grind of car detailing. On top of that, the existing surface lacked slip resistance, making it a potential hazard when wet. A standard concrete floor wasn’t cutting it—the shop needed a solution that could handle the workload while looking sleek and polished.

The Solution:

We installed a flake system with a polyaspartic topcoat, the ultimate solution for a high-traffic, chemical-prone environment. First, we ground down the existing surface and repaired imperfections, ensuring a flawless foundation. Next, a Cement Epoxy basecoat was applied, providing strong adhesion and long-term durability. We then broadcasted Domino Flakes to full rejection, creating a textured, non-slip surface that enhances both safety and aesthetics. The final step? A polyaspartic topcoat, which seals the floor against chemicals, UV rays, and everyday wear while allowing for quick and easy cleaning. In just four days, this detailing shop’s floor was transformed into a seamless, heavy-duty, and showroom-worthy space, ready to tackle whatever the business threw at it. 

Task: Flake System Installation – The Ultimate Car Detailing Shop Transformation

  • 🔹 Surface Preparation – Grinding to Greatness
    • First, we ground down the existing concrete, removing dirt, stains, and imperfections to create a clean, textured surface for maximum adhesion.
  • 🔹 Crack & Imperfection Repair – No Shortcuts Here
    • Any cracks or surface damage were repaired using industrial-grade polyurea crack filler, then re-ground to a smooth finish for a seamless application.
  • 🔹 Cement Epoxy Basecoat – The Foundation of Strength
    • We applied a high-performance Cement Epoxy basecoat, creating a tough, impact-resistant foundation that bonds tightly to the concrete.
  • 🔹 Full Flake Broadcast – Bringing the Floor to Life
    • Enter the Domino Flakes! These were broadcasted to full rejection, ensuring 100% coverage for a durable, textured, and slip-resistant surface.
  • 🔹 Flake Lock-In – Making It Stick
    • After the flakes cured, we scraped off excess material and vacuumed the surface, making sure everything was even, smooth, and flawless.
  • 🔹 Polyaspartic Topcoat – Sealing the Deal
    • A high-performance polyaspartic topcoat was applied, providing UV stability, chemical resistance, and an easy-to-clean finish that will last for years.
  • 🔹 The Big Reveal – A Shop-Ready Masterpiece
    • In just four days, the detailing shop now had a sleek, ultra-durable, and low-maintenance floor that could handle spills, tools, and tire marks like a champ!

So, we roll up to this car detailing shop in Stayner, Ontario, and the first thing we see? A 2,150 sqft concrete floor that had been through some things. This place was dealing with oil stains, chemical spills, water pooling, and enough scratches and cracks to make any shop owner cringe. It was impossible to clean, totally lacking slip resistance, and honestly, just didn’t match the high-end vibe of a professional auto detailing business. A detailing shop should have a flawless, easy-to-maintain floor that shows off the cars, not one that absorbs every drop of grease and water like a sponge.

The owner wanted a garage floor coating that could take a beating, handle constant foot traffic, heavy rolling tool carts, and tire marks, all while looking sleek and professional. And let’s be real—nobody wants to scrub a garage floor after a long workday, so easy cleaning was a must. That’s when we knew exactly what to do: Flake System with a Polyaspartic Topcoat.

“Alright, first things first—fixing that floor.”

Before we could lay down the good stuff, we had to grind the surface down to perfection. Years of dirt, grime, and wear? Gone. Then, we repaired every single crack and imperfection, filling them with industrial-strength polyurea, and grinding them down again until the floor was smoother than a fresh paint job.

Once that was done, we laid down a rock-solid Cement Epoxy basecoat, which basically acts like concrete armor, bonding tight and creating a foundation that won’t quit. Then came the fun part—full flake broadcast with Domino Flakes. We didn’t sprinkle—we went all-in, covering 100% of the surface for that durable, textured, and slip-resistant finish. These flakes don’t just look sick—they add extra grip, perfect for when things get wet in a detailing shop.

“Time to seal it in and make it bulletproof.”

After the flakes cured, we scraped and vacuumed to make sure everything was even and smooth. Then, the final boss level—a polyaspartic topcoat. This is what locks everything in, makes the floor chemical-resistant, UV-stable, and damn near indestructible. Oil? Spills? Tire friction? Doesn’t stand a chance. One quick mop and it’s back to looking brand new.

“Four days later? Absolute game-changer.”

When the shop owner walked in, his face said it all. The floor was now a slip-resistant, chemical-resistant, high-gloss masterpiece that could handle anything a car detailing shop throws at it. Now, instead of fighting stains and cracks, he’s got a garage floor built for performance and style—just like the cars he works on.

Need a garage floor coating, auto shop epoxy, or a detailing shop upgrade that actually lasts? You know who to call.

Other projects

how we work

01

FIRST TOUCH WITH US

Connect with us through a client form, phone call, email, or social media. Let’s start discussing your needs.
02

QUOTATION

We’ll review the project details with you, either over the phone or during an on-site visit, to provide an accurate quote.
03

DECISION MAKING

Choose your preferred system, design, and colours with our guidance.
04

SCHEDULING + 50% DEPOSIT

We’ll set a date for your project and secure a 50% deposit to confirm the booking.
05

Day of the project

depending on the service you picked we will Prepare concrete floors, repair concrete, diamond grind, polish or coat.
06

PROJECT REVIEW

Once the project is complete, we’ll walk through the results with you and collect the remaining 50% payment.